
Our furnace inspection setup with combustion analysis and other connected test instruments.

Combustion measurements are interpreted alongside the furnace inspection.

Electrical checks at accessible furnace wiring and controls.

Our furnace inspection setup with combustion analysis and other connected test instruments.
Gas Furnace Repair, Tune-Ups & Safety Checks in Temple, TX
Not heating properly? Making an unfamiliar sound or smell? We inspect, test and explain what your gas furnace needs.
Starting your gas furnace in Temple and finding that the house stays cool can be frustrating. We check how the furnace starts, burns and moves air, then explain the findings. You can also schedule a seasonal tune-up when the heat still works and you want a clearer understanding of its condition.
24/7 service availability. We travel to your home; call to discuss scheduling.
Gas odor or a CO alarm? Act first.
If you smell gas or a carbon monoxide alarm sounds, leave the building and call 911 from outside. For a suspected gas leak, also contact your gas utility from a safe location. Do not wait for routine service or reenter until emergency responders permit it. Carbon monoxide has no smell.
Gas furnace diagnosis, maintenance and condition checks
A repair visit investigates a problem. A seasonal tune-up addresses applicable maintenance and operating checks. A condition assessment helps you understand observed wear, operation and repair needs, whether or not the furnace has stopped heating.
This service focuses on gas furnaces. Heat-pump and electric-heating service remain available through our separate heating pages.
What have you noticed at home?
For example, air moving from a register does not prove that the burners are operating. If the blower runs while the rooms remain cool, we examine the heating sequence and airflow together instead of assuming that the thermostat or furnace must be replaced.
First-use odors and unfamiliar sounds
“Something smells different when the heat starts.”
Odors need to be distinguished rather than automatically called normal or dangerous. Do not keep running the furnace to see whether an unexplained odor disappears. Suspected gas leaks and CO alarms require the emergency response above.
“It bangs, rumbles, squeals or rattles.”
Ignition behavior, moving parts and airflow can produce different sounds. When a sound occurs in the cycle helps guide inspection; the sound alone is not a diagnosis.
Weak heat, shutdowns or a blower without burners
We follow the operating sequence and compare symptoms with relevant measurements instead of replacing parts by guesswork.
“It runs, but the house does not get warm.”
Weak or cool air, uneven temperatures and long run times call for evaluation of furnace operation, airflow, controls and other relevant conditions.
“It starts, then shuts off again.”
Repeated starts, short cycles and intermittent heat can have different causes. Testing helps identify where operation stops and what needs attention.
“The blower runs, but the burners do not come on.”
This is a diagnostic call involving the ignition sequence and related controls. We investigate the cause; do not bypass safety devices to force heat.
Tell us what you have already observed. Do not run or restart a concerning furnace solely to demonstrate a symptom.
What we inspect and test
Checks are selected for the equipment, accessibility and reported symptoms. Every furnace and visit does not permit or require an identical set of tests.
- Your reported symptoms and operating history.
- Accessible furnace components and visible condition.
- Ignition, burners, relevant safety controls and operating sequence.
- Blower operation, filter condition and airflow concerns.
- Temperature rise and other applicable operating measurements.
- Accessible venting and combustion-air conditions.
- Gas pressure where applicable.
- Combustion analysis using Fieldpiece equipment.
- Carbon monoxide measurements appropriate to the concern.
- Visual and camera-assisted checks of accessible heat-exchanger areas.
We explain the findings, the limits of the assessment and recommended next steps before proposed work proceeds.
“My furnace is old. Is it still working properly?”
Age alone does not require replacement. We assess observed wear, operation, test results, repair needs and accessible components. We explain repair or further-evaluation options based on what we find, without promising remaining lifespan.
“It heats, but I want it checked before winter use.”
A seasonal tune-up is useful when you want to understand your gas furnace’s current condition before depending on it regularly. Mention changes in sound, smell, cycle length or comfort even if it still heats. Maintenance can identify concerns; it cannot guarantee future fault-free operation.
Carbon monoxide and heat-exchanger assessment
Combustion analysis measures conditions in the furnace’s combustion/exhaust stream. Indoor-air CO measurements assess the air in the locations tested. These are different measurements with different purposes. We explain them in context with burner operation, venting and other observations.
Visual and camera-assisted checks can examine accessible heat-exchanger areas. Equipment design and access may leave surfaces unseen. A camera cannot reveal every surface or rule out every defect. Combustion analysis and CO readings support an assessment; they do not independently certify the entire furnace or home as safe.
A photo is not a test result
The genuine Hardison furnace photo on this page shows burners and accessible equipment. Flame appearance in a photograph cannot establish correct combustion or rule out a CO concern. Measurements and inspection provide different information.
Planning gas-furnace service in Temple
For Temple service, tell us whether you need a repair, seasonal tune-up or equipment-condition check. Share the symptoms and operating history you already know. Call 254-500-4957 to discuss availability; service is provided at customers’ homes.
Clear explanations from Hardison
Hardison Heat, Air & Plumbing is the same locally owned, family-operated business serving these communities from Temple. The city pages describe our service coverage; they do not represent separate offices.
- Diagnosis guided by the reported problem.
- Checks appropriate to the equipment and access.
- Findings and recommendations explained before work.
- Inspection limits stated clearly.
- Heat-pump and electric-heating service also available.
Gas furnace service in Temple
We travel to homeowners throughout Temple and surrounding verified service communities.
Gas furnace questions from homeowners
Why does my blower run without warm air?
The blower and burners have different roles. We check whether the furnace receives a heating call, how the ignition sequence progresses and what the controls indicate. Airflow alone does not identify the failed component.
Can you inspect my furnace before regular winter use?
Yes. Tell us about previous shutdowns, noises or uneven heat even if it works today. That history helps us select the appropriate checks.
Will you recommend replacement just because it is old?
No. We assess the condition and repair needs we can observe. Age is context, not proof that replacement is necessary.
Call for gas furnace service in Temple
Describe your furnace concern to Hardison Heat, Air & Plumbing. We offer 24/7 service availability and will discuss the appropriate next step and scheduling.
